POWERHOUSE is a water conditioner with a proprietary surfactant blend. POWERHOUSE also contains an antifoaming agent to minimize foaming.

POWERHOUSE may be used with pesticides that either require or suggest the use of ammonium sulfate and/or ammonium sulfate + surfactants as the recommended adjuvant.

DIRECTIONS FOR USE

(Shake well before using)

USE RATES

POWERHOUSE should be used at 5 – 10 quarts/100 gallons of spray solution (1.25 - 2.5% v/v). Other

adjuvants may be added for deposition, retention and canopy penetration. Always read and follow the specific pesticide label directions, adjuvant suggestions, rates, and mixing instructions.

MIXING INSTRUCTIONS

IMPORTANT - Add POWERHOUSE to the spray tank first before adding any other tank mix product, unless the tank mix pesticide(s) or additives direct otherwise.

Mixing Order

1. Fill tank 1/2 full of water and begin agitation.

2. Add the required amount of POWERHOUSE while agitating.

3. Continue filling spray tank with water and add the tank mix components as directed on the pesticide label(s).

ULTRA-LITE is a liquid formulation of ammonium sulfate and nonionic surfactant in a user-friendly premix. ULTRA-LITE is

designed to be used with any herbicide label that calls for a combination of nonionic surfactant and AMS inclusions.

ULTRA-LITE will:

• Offer faster surfactant wetting and surface tension reduction enhancing herbicide movement through the cuticle on the

leaf surface

• Make herbicide formulations work better by guarding against hard water antagonism

• Add ammonium ions to help increase plant uptake of herbicide through the phloem of the plant

ULTRA-LITE makes herbicides work better, faster and longer than many other adjuvant formulations.

DIRECTIONS FOR USE

Gallons of ULTRA-LITE Quarts/100 gallons Pounds/100 gallons per 100 gallons Nonionic Ammonium (v/v) of water Surfactant (NIS) Sulfate(AMS)

1.25 gallons 1 pint 4.25 lbs. (0.5% v/v)

2.50 gallons 1 quart 8.50 lbs. (1% v/v)

5.00 gallons 2 quarts 17.0 lbs. (2% v/v)

The amount of ULTRA-LITE to add to a 10 gallon per acre application rate mixture would be:

1. One pint (1 pt.) per acre to get 1 pint NIS v/v and 0.5% v/v of AMS

2. One quart (1 qt.) per acre to get 1 quart NIS v/v and 1% v/v of AMS

3. Two quart (2 qt.) per acre to get 2 quarts NIS v/v and 2% v/v of AMS

MIXING INSTRUCTIONS

Always read and follow specific mixing instructions on the herbicide label.